EVAPORATIVE CONDENSERS


CCX Series

Série ACX

CCX SERIES 

Centrifugal Evaporative Condensers

 

Equipped with centrifugal fans at the base and on the dry air side and suitable for Air Conditioning and Cooling Installations in low accoustic level environments. Easy assembly of Sound Attenuators at the inlet/outlet air discharge channels. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

 

110 Models with nominal capacities from 78 to 6245 kW.

CCX - HPIM2856

CCX - HPIM8891

CCX - HPIM2849

CCX - HPIM8895

CCX - Construction Details

Download

CLC Series

CLC SERIES 

Low Profile Centrifugal Evaporative Condensers

 

Equipped with centrifugal fan in monocell unit and produces low accoustic levels. Suitable for Air Conditioning and Cooling Installations. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

 

29 Models with nominal capacities from 225 to 1509 kW.

CLC - HPIM0855

CLC - HPIM6991

CLC - Construction Details

Download

CMX Series

AMX - HPIM7090

CMX SERIES 

Axial Pressurized Evaporative Condensers

 

Equipped with axial fan suitable for Industrial Refrigeration. Serpentine coils are manufactured in steel tubing and the entire assemblyis  hot-dip galvanized after fabrication. (Stainless steel is an option)

 

72 Models with nominal capacities from 608 to 6935 kW.

CMX - Construction Details

Download

 

CGA Series

Série AMA

CGA SERIES

Axial Evaporative Condensers

 

Equipped with axial fan and manufactured in fiberglass reinforced polyester (FRP) with nuts and grids in stainless steel AISI 304 or UNIVAC Corrosion Protection System. A good option for cooling in industrial environments due to low electrical power requirements and resistance to corrosion. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

 

138 Models with nominal capacities from 100 to 5660 kW.

CGA - 0792

CGA - DSC00154

CGA - DSC00158

CGA - 0790

CGA - Construction Details

Download

CAS Series

Série CAS

CAS SERIES

Silent Axial Refrigerant Condensers

 

Equipped with Axial Fans and manufactured in fiberglass reinforced polyester (FRP), screws and profiles in stainless steel or UNIVAC System.

 

THREE STRONG POINTS:

1 - STOP TO CORROSION - LONG LIFE

2 - LOW ACOUSTIC LEVEL

3 - LOW ENERGY CONSUMPTION

 

Easy maintenance and access to the interior of Candenser.

Serpentine coils are manufactured in steel tubing with galvanizing after manufacture. (Stainless steel is an option).

 

A good option for AIR CONDITIONING and INDUSTRIAL PROCESSES.

 

138 Models with nominal capacities from 100 to 5660 kW

CAS 0195

CAS 0207

CAS 0204

CAS 0199

CAS - Construction Details

Download

Sound Attenuators

ATEN. ACUS. - HPIM0839

The acoustic level tunning process of our Evaporative Cooling Units requires an evaluation of acoustical, thermal and cost factors. UNICLIMA can perform this evaluation and propose the appropriate changes to achieve the objectives without sacrificing thermal performance. The Sound Attenuators are designed and manufactured by UNICLIMA. We provide accoustic attenuators for centrifugal fan units (TCX - TCL - ACX - ACL - CCX - CLC) and axial fan units (TLA - TA - ALA - AMA - CLA - CGA)

Containerized

Containerized for sea

Containerized

UNIVAC Corrosion Protection System

UNICLIMA developed and introduced in 1996 a UNIVAC SYSTEM. This system is not only a surface treatment, but also provides superior corrosion protection. The UNIVAC SYSTEM extends equipment life and provides a lower cost solution for cases where the equipment has to work in poor water quality, environmental considerations or equipment location. It is notable its resistance to salt spray, chemicals, abrasion, impact, ultraviolet radiation (sun) and thermal shock. 

 

The UNIVAC SYSTEM has the following proceeding: 

1) Galvanized steel sheets and coated on both sides with Thermosetting Powder (Polyester Silicon Type), 

2) Tightening of all components with screws and  nut in stainless, avoiding this way the drilling of the panels after the Treatment of Surface with drills or self-threaded screws. 

3) Use of PVC (Polyvinyl chloride) in Drift Eliminators, Water Distribution System, Fill, Tubular Connection, etc.

 

The combination of these three basic procedures with other small details define UNIVAC SYSTEM which provides a final product with the purpose of evaporative cooling water of high quality.

Corrosion System

 
Contact
Uniclima-Instalações Térmicas Lda
Porto - Evaporative Condensers


COOLING TOWERS

Rua Júlio Dinis 585,4º-D-F
4050-325 PORTO
( Lordelo do Ouro e Massarelos )
226 097 796
226 003 888